A very important note: The contractor must visit the furnace site, Directorate - Marib Governorate, study the technical specifications, fill out the attached technical tables and attach a technical study to the furnace design Equipment supply and installation work: أعمال توريد وتركيب المعدات: SUPPLY, INSTALLATION, TESTING AND OPERATION OF AN INTEGRATED ROTARY RACK OVEN: - Supply, installation, testing and operation of an integrated ROTARY RACK OVEN according to the attached technical specifications,. The work includes All necessary parts and extensions (fuel and smoke pumps - fuel supply pipes from the tank - pipes and a 700-liter plastic tank for condensed steam with its own base making - galvanized iron pipes coming out to the fermentation room "- welding work for adjusting the oven to suit the bread) Roti) and all that is required to operate the oven system to the fullest extent.(catalog and warranty must be attached) - Supplying and installing additional seater trolley with the same dimensions mentioned in the attached technical specifications. توريد وتركيب و تشغيل فرن كهربائي دوار: - توريد وتركيب و تشغيل فرن كهربائي دوار بحسب المواصفات الفنية المرفقة ويشمل كافة القطع و التمديدات اللازمة ) مضخات الوقود و الدخان - بيبات تموين الوقود من الخزان - بيبات و خزان بلاستيك سعة 00 لتر للبخار المكثف مع عمل قاعدة خاصة به - أنابيب حديد مجلفن الخارجة إلى غرفة التخمير " - أعمال اللحام الخاصة بتعديل الفرن ليناسب الخبز ) الروتي ). وكل مايزم لتشغيل منظومة الفرن على أكمل وجه. ) يلزم إرفاق الكتالوج و الضمان ( - توريد وتركيب عربيات إضافية بنفس الا بعاد المذكورة في المواصفات الفنية المرفقة.. SUPPLY, INSTALLATION, TESTING AND OPERATION OF A FERMENTATION ROOM : Supply, installation, testing and operation of a fermentation room of heat-insulating pressurized panels coated with thermally painted zinc plates. And with an area of 9 square meters and the appropriate height. The clause includes: - All scraps, handles and hinges are made of stainless steel, with two opposite doors for entering and exiting the baking trays, and with three hinges, a closed one, and frames from the barrel to hold the steam. - Installing stainless steel frames in all corners of the outer room, and the bottom of the room from the inside, with fixing protections on the floor of the room to prevent trays from friction with the sides of the room. - Supply and installation of a ground machine to drain the water resulting from condensation of steam, and it includes all pipes and pits to drain the water to the nearest drainage room outside the bakery. All that is necessary for the fermentation room to be ready for operation, according to the instructions of توريد وتركيب و اختبار وتشغيل غرفة تخمير: توريد وتركيب و اختبار وتشغيل غرفة تخميرمن الا لواح المضغوطة العازلة للحرارة والمغلفة بألواح الزنك المدهونة حراريا. و بمساحة 9 متر مربع والا رتفاع المناسب. و يشمل: - كافة الخرداوات و المقابض و المفصلات من مادة الا ستيلنس استيل المقاومة للصدأ وعمل بابين متقابلين لدخول وخروج صواني الخبز وبثلاث مفصلات ومغلق و اطارات من الربل لحجز البخار. - تركيب اطارات من الاستانلس استيل في كل زوايا الغرفة الخارجية واسفل الغرفة من الداخل مع ثبيت حميات في أرضية الغرفة تمنع احتكاك الصواني بجوانب الغرفة. - توريد وتركيب مشن أرضي لتصريف الماء الناتج من تكثيف البخار ويشمل كل المواسير والحفر لتصريف الماء إلى أقرب غرفة تصريف خارج المخبز. وكل مايلزم لتكون غرفة التخمير جاهزة للتشغيل و بحسب تعليمات المهندس. SPIRAL MIXER: Supply, installation and operation of an automatic mixer (kneader) capacity of 00 kg and according to the attached technical specific`ations.(catalog and warranty must be attached) خلاط حلزوني أوتوماتيكي : توريد و تركيب و تشغيل خلاط أوتوماتيكي ) عجانة ( سعة 00 كجم و بحسب المواصفات الفنية المرفقة.( يلزم إرفاق الكتالوج و الضمان (.3 DOUGH MOULDER MACHINE : Supplying, installing and operating a dough forming machine according to the attached technical specifications. (Catalog and warranty must be attached) توريد وتركيب ماكينة تشكيل العجينة ) فرامة ): توريد و تركيب و تشغيل ماكينة تشكيل العجين ) فرامة ( و بحسب المواصفات الفنية المرفقة. ) يلزم إرفاق الكتالوج و الضمان (. VOLUMETRIC DOUGH DIVIDER MACHINE : Supplying, installing and operating a volumetric dough divider machine according to the attached technical specifications. (Catalog and warranty must be attached) توريد وتركيب ماكينة تقطيع العجين الحجمي : توريد و تركيب و تشغيل ماكينة تقطيع العجين الحجمي و بحسب المواصفات الفنية المرفقة. ) يلزم إرفاق الكتالوج و الضمان (. Page of 5
SUPPLY BREAD TRAYS: By number: the supply of baking trays for the quality of local bread (roti), and the item includes the supply of special iron, shaping, welding, smoothing of edges, pre-firing, oiling, and delivery ready for work. SUPPLY AND INSTALLATION OF A 3000-LITER WATER TANK (THREE LAYERS PLASTIC) WITH THE BASE: In number: Supply and installation of an upper plastic water tank with a capacity of 3 cubic meters, including the float, a hole for filtering and cocks, and the item includes all pipelines to and from the tank to the feeding point at the dough site and placed at a height of not less than. cm from the ground, according to the drawings, specifications and instructions of the supervising engineer. Supplying and installing a steel base (H beam) with a height of.m, in the appropriate section. 36 توريد صواني الخبز: بال: توريد صواني الخبز الخاص بنوعية الخبز المحلي (الروتي) و يشمل توريد الحديد الخاص و التشكيل و التلحيم و التنعيم الجيد للحواف و الا حراق المسبق و التزييت وتسليمها جاهزة للعمل. توريد وتركيب خزان ماء ) بلاستيك ثلاث طبقات ( سعة 3000 لتر مع القاعدة:- بال : توريد وتركيب خزان مياه بلاستيك علوي سعة 3 متر مكعب, شاملا العوامة وفتحة للتصفية والمحابس و يشمل جميع مواسير التمديدات من وإلى الخزان وحتى نقطة التغذية عند موقع العجانة ويوضع على ارتفاع لايقل عن. م سم من الا رض طبقا للرسومات والمواصفات و تعليمات المهندس توريد وتركيب قاعدة حديدية ) beam ( H بارتفاع. م بالقطاع المناسب..5.6 SUPPLY AND INSTALLATION OF A FUEL TANK (DIESEL): In number: Supply and installation of a fuel tank (diesel) from iron sheets of excellent quality and thickness of mm with a base height of. m, and the price includes welding work three layers with examination and testing by water or special sprays, and making appropriate belts. The price also includes the supply and installation of a base of H-beam steel beams, drilling and casting works, the supply and installation of / "iron pipes from the tank to the oven and the appropriate diameter from the tank to the point of supply with all valves and connections, and doing all that is necessary to complete the item as per the instructions of Blacksmithing works: SUPPLY AND INSTALLATION OF SAFETY DOORS: Supply and installation of a partition behind the main doors of evacuated iron pipes, dimin grills and nets, with two doors ( *.5) m and filling any spaces around the outer frame with foam material, and the price includes welding and painting in the agreed color, and the supply and installation of all What is required to complete the item in full accordance with the instructions of SUPPLY AND INSTALLATION OF BREAD EMPTYING CONTAINERS: Supply and installation of bread emptying containers: Supply and installation of bread emptying containers from hollow iron pellets and damn mesh with the following dimensions (length = 00 cm - width = 90 cm - height = 0 cm), provided that it contains an additional tractor container and wheels containing a stop switch, and the total height of the table = 0 cm And the price includes welding, painting, supply and installation of everything necessary to complete the item and according to the instructions of SUPPLY AND INSTALLATION OF A TABLE FOR PLACING TRAYS: Supplying and installing a table to place the trays on it, which is made of hollow iron sheets and a regular iron plate with the following dimensions (length = 70 cm - width = 70 cm - height = 90 cm), provided that it contains an additional tractor container and wheels containing a stop switch, and the total height of the table = 90 cm, and the price includes welding, painting, supply and installation of everything necessary to finish the item fully and according to the instructions of SUPPLY AND INSTALLATION OF A STAINLESS-STEEL DOUGH EMPTYING TABLE: Supplying and installing a table for rolling out the dough coming out of the kneader, provided that the legs and beams are of empty iron tubes, and the table plate shall be of stainless steel with 3 side edges with a height of 30-0 cm and the following dimensions (length = 80 cm - width = 90 cm - suitable height = 90-00 cm), and the price includes welding, painting, supply and installation of everything necessary to complete the item and according to the instructions of SUPPLY AND INSTALLATION OF A TABLE 60 cm * 60 cm: Supplying and installing a receiving table from a dough cutting machine, provided that the legs and beams are made of empty iron tubes and the table plate is made of stainless steel and with the following dimensions (length = 60 cm - width = 60 cm - suitable height = 80 cm), and the price includes welding and painting And the supply and installation of everything necessary to complete the item fully, according to the instructions of توريد وتركيب خزان وقود ) ديزل):- بال: توريد وتركيب خزان وقود ) ديزل) من صفائح الحديد نوعية ممتازة وسماكة مم مع قاعدة بارتفاع. م والثمن يشمل أعمال اللحام ثلاث طبقات مع الفحص والا ختبار بواسطة الماء أو البخاخات الخاصة وعمل الا حزمة المناسبة. كما يشمل الثمن توريد وتركيب قاعدة من جسور الحديد إنش بيم وأعمال الحفر و الصب توريد و تركيب بيبات حديد ربع هنش من الخزان إلى الفرن وبالقطر المناسب من الخزان إلى نقطة التزويد مع كل المحابس و التوصيلات وعمل كل مايلزم لا نهاء على أكمل وجه وبحسب تعليمات المهندس أعمال الحدادة: توريد وتركيب أبواب حماية : توريد وتركيب قاطع خلف الا بواب الرئيسية من بيبات الحديد المفرغ و شبك الديمن وشبك النامس مع عمل باب درفتين ) *.5 )م و تعبئة أي فراغات حول الا طار الخارجي بمادة ) الفوم ) والثمن يشمل أعمال اللحام و الدهان باللون المتفق عليه وتوريد وتركيب كل مايلزم لا نهاء على أكمل وجه وبحسب تعليمات المهندس توريد وتركيب حاويات تفريغ الخبز: توريد وتركيب حاويات تفريغ الخبز من بيبات الحديد المفرغ و شبك الديمن و بالا بعاد التالية ) طول= 00 سم - عرض= 90 سم - ارتفاع= 0 سم ( على أن يحتوي على حاوية جرارة إضافية و عجلات تحتوي مفتاح توقيف والارتفاع الكلي للطاولة = 0 سم والسعر يشمل أعمال اللحام و الدهان وتوريد وتركيب كل مايلزم لا نهاء على أكمل وجه وبحسب تعليمات المهندس م مر ع M توريد وتركيب طاولة لوضع الصواني : توريد وتركيب طاولة لوضع الصواني عليها وتكون من بيبات الحديد المفرغ وصفيحة حديد عادي و بالا بعاد التالية ) طول= 70 سم - عرض= 70 سم - ارتفاع= 90 سم) على أن يحتوي على حاوية جرارة إضافية و عجلات تحتوي مفتاح توقيف والارتفاع الكلي للطاولة = 90 سم والسعر يشمل أعمال اللحام و الدهان وتوريد وتركيب كل مايلزم لا نهاء على أكمل وجه وبحسب تعليمات المهندس توريد وتركيب طاولة ستانلس ستيل لتفريغ العجين: توريد وتركيب طاولة لطرح العجين الخارج من العجانة على أن تكون القوائم وعوارض من بيبات الحديد المفرغ المقاومة للصدأ وتكون الصفيحة الطاولة من الا ستانلس استيل مع 3 حواف جانبية بارتفاع -0 30 سم و بالا بعاد التالية ) طول= 80 سم - عرض= 90 سم - ارتفاع مناسب = 00-90 سم ) والسعر يشمل أعمال اللحام و الدهان وتوريد وتركيب كل مايلزم لا نهاء على أكمل وجه وبحسب تعليمات المهندس توريد وتركيب طاولة 60 سم * 60 سم: توريد وتركيب طاولة ملحقة بمكينة تقطيع العجين على أن تكون القوائم وعوارض من بيبات الحديد المفرغ المقاومة للصدأ وتكون صفيحة الطاولة من الا ستانلس استيل و بالا بعاد التالية ) طول= 60 سم - عرض= 60 سم - ارتفاع مناسب = 80 سم ) والسعر يشمل أعمال اللحام و الدهان وتوريد وتركيب كل مايلزم لا نهاء على أكمل وجه وبحسب تعليمات المهندس.7...3..5 Page of 5
Supply and installation of oven exhausts: Supply, installation and testing of furnace exhausts from galvanized iron sheets, thickness () mm, diameter (00-300) mm, obtuse angles and the appropriate height. The clause includes all that is necessary for connecting the exhausts to the furnace and the welding and installation work. توريد وتركيب عوادم الفرن: توريد وتركيب و اختبار عوادم الفرن من صفائح الحديد المجلفن سماكة ) ( ملم وقطر ) 00- ( 300 ملم وبزوايا منفرجة وبالا رتفاع المناسب.و يشمل كل مايلزم لتوصيل العوادم بالفرن و أعمال اللحام و التثبيت..6 Electrical Works : 3 الاعمال الكهربائية : Page 3 of 5
Supply, installation and opreating of a 0 kw generator: Supplying, installing and operating an electric generator (motor), with a net output of 0 kilowatts, a European industry, a muffler, and with a guarantee of replacement and maintenance of no less than a year, and the price includes: transportation and installation - building a base of a soild blocks at a height of 0 cm with coating and painting - meter - filter - a layer of foil (Or any special insulation linoleum), and the supply and installation of everything necessary to complete the item fully, according to the instructions of توريد وتركيب وتشغيل مولد كهربائي 0 كيلو وات: توريد وتركيب وتشغيل مولد كهربائي ) موتور) بصافي انتاج 0 كيلوات صناعة أوربية كاتم للصوت وبضمان استبدال وصيانة لايقل عن عام و السعر يشمل: التقل و التركيب - بناء قاعدة من البلك الصم بارتفاع 0 سم مع التلبيس والدهان - عداد - فلتر - طبقة من الفلت ) أو أي مشمع عزل خاص ( وتوريد وتركيب كل مايلزم لا نهاء على أكمل وجه وبحسب تعليمات المهندس 3. By linear meter: Supplying, installing and connecting a 6 mm cable to the generator, and it includes all excavation, burial, plastic pipes and fixing to walls if necessary, according to the technical specifications and instructions of 0 بالمتر الطولي: توريد وتركيب وربط كيبل 6 مم بالمولد ويشمل كافة أعمال الحفر و الدفن و المواسير البلاستيكية و التثبيت بالجدران إذا لزم الا مر وبحسب المواصفات الفنية و تعليمات المهندس م طو M.L 3. Extension and installation of * cables specially twisted to operate four triple motors from the main control panel to the equipment site (motors) with the work of a ground unit for each engine, as the installation area consists of up to 5 m * 5 m with the work of a UPL breaker at the location of each engine in the appropriate ampere The power of the motor, each motor having its operating capacity of 73 kw, with the work of a 5 * 0 tri cable from the control panel to the operating site, with a length of about 55 m. The price also includes all work supplies from tools and numbering so that the point is ready for operation. تمديد و تركيب كابلات * مبروم خاص لتشغيل أربعة محركات ثلاثية من لوحة التحكم الرئيسية إلى موقع المعدات ) المحركات) مع عمل وحدة أرض لكل محرك حيث أن مساحة التركيب يتكون بحدود 5 م * 5 م مع عمل قاطع UPL عند موقع كل محرك بالا مبيرية المناسبة و القدرة الخاصة بالمحرك كون كل محرك قدرته التشغيلية kw 73 مع عمل كابل تري * 5 0 من لوحة التحكم إلى موقع التشغيل و ذلك بطول حوالي 55 م.كما يشمل السعر كل لوازم العمل من الا دوات و الترقيم بحيث تصبح النقطة جاهزة للتشغيل. 3.3 Assembling and installing a 60 * 70 cm board for control to make four triple motors, so that the board contains and includes the following: - Automatic control system in the event of losing one of the winnings - Protection system for each motor (thermal protection) - Signal system for the presence of electricity - Taking into account the choice of the value of the cutters to protect against any defect, as well as the value of the contactors.so that the price includes all installation supplies, numbering, connection and making suitable holes on all cables, according to the instructions of تجميع وتركيب لوحة 60*70 خاصة بالتحكم لعمل أربعة محركات ثلاثية بحيث تحتوي اللوحة و تشمل الا تي: - نظام التحكم الا لي في حال فقدان أحد الفيزات - نظام الحماية لكل محرك ) الحماية الحرارية) - نظام الا شارة لوجود الكهرباء - مع مراعاة اختيار قيمة القواطع للحماية من أي خلل و كذا قيمة الكنتكترات. بحيث يشمل السعر كافة لوازم التثبيت و الترقيم و التوصيل وعمل فتحات مناسبة على جميع الكابلات و بحسب تعليمات المهندس 3. Assembling and installing a special board (local work) that contains the following: - Shecomover knife 00A (switch between backup and main (public) / PoL sources - Main cutter ABU 00A MSSP 3PoL (for Sakineh main - Main circuit breaker ABO 00A 3PoL MSSP (for backup to alternator) - Single cutters for extraction fans Signal lamps for the presence of the main network - Circuit breakers are also made to control according to the work site. The price includes all extensions, assembly and installation works, according to the instructions of the supervising engineer تجميع و تركيب لوحة خاصة ) عمل محلي ( وتحتوي على الا تي: - سكين شكموفر ) 00A تبديل بين المصادر الاحتياطية و الرئيسية ) العمومي) PoL/ - قاطع رئيسي أبو ) 00A MSSP 3PoL خاص بسكينة الرئيسي - قاطع رئيسي أبو ) 00A 3PoL MSSP خاص بالاحتياطي الى المولد) - قواطع مفردة خاصة بمراوح الشفط - لمبات إشارة لوجود الشبكة الرئيسية - كما يتم فيها عمل قواطع للتحكم بحسب موقع العمل. ويشمل السعر كافة أعمال التمديدات و التجميع و التركيب و بحسب تعليمات المهندس 3.5 Supply and installation of air intake fans: Supply, installation and operation of iron fans for air intake size (60 cm * 60 cm), with circular frames made of galvanized iron sheets of suitable width to enhance the drawing process, provided that each pair is installed opposite and in reverse direction (entry - exit), and the item includes all Welding works and electrical works (extension of cables with appropriate sections to the main board - electrical sockets - boxes - pipes) and any civil works of crushing and dressing if necessary to complete the work to the fullest and according to the instructions of 6 توريد وتركيب مراوح سحب الهواء: توريد وتركيب و تشغيل مراوح حديد لسحب الهواء مقاس ) 60 سم * 60 سم ) مع عمل اطارات دائرية من صفائح الحديد المجلفن بعرض مناسب لتعزيز عملية السحب على أن يتم تركيب كل زوج بشكل متقابل و بعكس الاتجاه ) دخول - خروج ) و يشمل كافة أعمال اللحام والا عمال الكهربائية ) تمديد كيبلات 3*.5 داخل الكابل ثري المذكور سابقا وتوصيلها إلى اللوحة الرئيسية المصنعة محليا - مآخذ كهرابائية - علب - بيبات ( و أي أعمال مدنية من تكسير و تلبيس إذغ لزم الا مر للا نهاء العمل على أكمل وجه و بحسب تعليمات المهندس 3.6 Supply and installation of standing air fans: By number: Supply, installation and operation of large-sized, multi-speed, robust and efficient air fans, including all electrical installations and sockets and all that is needed, according to the instructions of the supervising engineer. توريد وتركيب مراوح هواء قائم : بال: توريد وتركيب و تشغيل مراوح هواء قائمة حجم كبير متة السرعات و ذات متانة وكفاءة عالية ويشمل كافة التمديدات الكهربائية و المآخذ وكل مايلزم و بحسب تعليمات المهندس 3.7 Earthing systim: by number: Supply and installation of a suitable grounding unit for all components of the building and must protect against electricity and lightning hazards. It must contain: copper wire, copper plate, copper rod, clutches to connect the group together and also add coal and salt and includes all necessary Establishing and connecting wires and implementation as instructed by the supervising engineer و حدة تأريض: توريد وتركيب وحدة تأريض مناسبة لجميع مكونات المبنى ويجب أن يحمي من مخاطر الكهرباء والصواعق لذلك يجب أن يحتوي على: سلك نحاسي صفيحة نحاسية قضيب نحاسي قوابض لربط المجموعة مع بعضها و أيضا إضافة الفحم و الملح و بناء غرفة تفتيش 30*30 ويشمل جميع مايلزم من تأسيس وربط الا سلاك و التنفيذ بحسب تعليمات المهندس 3.8 Page of 5 Administration room electrical works: الا عمال الكهربائية الخاصة بغرفة الا دارة: كتاب ة
Supply and installation of fluorescent lighting devices Singel 0 cm (0 W): By the number: Supply and installation of fluorescent lighting devices single 60 cm ( 0) watts, with the switch and cover include black plastic pipes (PVC) and bend - in bending areas - using springs, which are placed before Casting, cans, covers and fixing with screws, and wires from point to distribution board, according to drawings, specifications and instructions of 5 توريد وتركيب أجهزة إنارة فلورسنت سنجل 0 سم (0 ): W بال : توريد وتركيب أجهزة إنارة فلورسنت مفرد 60 سم ( 0 )وات, مع المفتاح والغطاء وتشمل المواسير البلاستيكية السوداء (PVC) وتثنى - في مناطق الثني- باستخدام الاسبرنج, والتي توضع قبل الصب, والعلب وأغطيتها وتثبيتها بالمسامير القلاووظ, والا سلاك من النقطة إلى لوحة التوزيع, طبقا للرسومات والمواصفات و تعليمات المهندس. Supply and installation of ceiling fans: by Number: Supply and installation of ceiling-mounted fans, type (GFC) or equivalent, with the key and all supplies, and connections within the black plastic pipes (PVC) and bend - in the bend areas - using springs, copper wires and cans with screws, connection to the distribution board, according to drawings, specifications and instructions of Supply and installation of 5 A power outlet: By number: Supply and installation of 5 A power outlet with switch (switch), installed inside the wall with all supplies of black plastic pipes (PVC) and bend - in the bend areas - using springs, copper wire thickness.0 mm, And cans with installation, connection to the distribution board, according to drawings, specifications and instructions of بال توريد وتركيب مراوح سقوف : : توريد وتركيب مراوح تثبت بالسقوف نوع (C G) F أو مايعادلها مع المفتاح وجميع المستلزمات والتوصيلات داخل المواسير البلاستيكية السوداء (PVC) وتثنى - في مناطق الثنى - باستخدام الاسبرنج أسلاك من النحاس والعلب مع التثبيت بالمسامبر القلاووظ التوصيل حتى نقطة التجميع, طبقا للرسومات والمواصفات و تعليمات المهندس توريد وتركيب مأخد كهرباء قوة A: 5 بال : توريد وتركيب مأخد كهرباء قوة A 5 مع المفتاح (سويتش ( يركب داخل الحائط مع جميع المستلزمات من مواسير البلاستيك السوداء (PVC) وتثنى - في مناطق الثنى - باستخدام الاسبرنج وأسلاك من النحاس سمك مم, وعلب مع التثبيت والتوصيل حتى لوحة التوزيع, طبقا للرسومات والمواصفات و تعليمات المهندس..3 Supply and installation of 3 A power outlet: By number: Supply and installation of 3 A power outlet with switch (switch), installed inside the wall with all supplies of black plastic pipes (PVC) and bend - in the bend areas - using springs, copper wire thickness.5 mm, And cans with installation, connection to the distribution board, according to drawings, specifications and instructions of 5 توريد وتركيب مأخد كهرباء قوة A: 3 بال : توريد وتركيب مأخد كهرباء قوة A 3 مع المفتاح (سويتش ( يركب داخل الحائط مع جميع المستلزمات من مواسير البلاستيك السوداء (PVC) وتثنى - في مناطق الثنى - باستخدام الاسبرنج وأسلاك من النحاس سمك.5 مم, وعلب مع التثبيت والتوصيل حتى لوحة UPS الخاصة بالبطارية وعمل حماية لها من اللوحة الرئيسية المصنعة محليا طبقا للرسومات والمواصفات و تعليمات المهندس. Supply and installation of telephone points: By number: Supply and installation of fixed telephone boxes, excellent quality, and include black plastic pipes completely independent of electricity pipes, cans and covers and fastening screws, from the point to the main point, according to drawings, specifications and instructions of the engineer Supervisor توريد وتركيب نقاط الهاتف "فيش": بال : توريد وتركيب علب للهاتف الثابت"فيش",نوعية ممتازة, وتشمل المواسير البلاستيكية السوداء مستقلة تماما عن مواسير الكهرباء,والعلب وأغطيتها وتثبيتها بالمسامير القلاووظ, من النقطة إلى النقطة الرئيسية, طبقا للرسومات والمواصفات و تعليمات المهندس.5 Supply, installation, connection and operation of a 00 amp battery and a 00 watt charger: Supply and installation of a 00 ampere battery of excellent quality and connect it to a 000 watt charger of excellent quality, and it includes the iron holder and electrical work (connection to the electrical circuit of the room and so that it is connected to the locally manufactured main board with its own cutter - electrical sockets) and all that is required according to the drawings and specifications And instructions of the supervising engineer. توريد وتركيب وربط وتشغيل بطارية 00 أمبير وشاحن 000 وات: بال: توريد وتركيب بطارية 00 أمبير نوعية ممتازة و توصيلها بشاحن ) 000 UPS ( وات نوعية ممتازة و يشمل الحامل الحديدي و الا عمال الكهربائية ) التوصيل بالدائرة الكهربائية للغرفة وبحيث يتم ربطها باللوحة الرئيسية المصنعة محليا مع عمل قاطع خاص بها المآخذ الكهربائية ( وكل مايلزم طبقا للرسومات والمواصفات و تعليمات المهندس.6 Supply and installation of ton split air conditioner: in number: Supply, installation and testing of ton air conditioner, excellent industry, and it includes all water outlet extensions, wiring and electrical switches. بال توريد و تركيب مكيف هواء اسبليت طن: توريد وتركيب و تشغيل مكيف هواء طن صناعة ممتازة ويشمل كافة تمديدات مخرج الماء و التمديدات والمفاتيح الكهربائية. إجمالي العام.7 Page 5 of 5